Flexible Aluminum Foil Insulated Exhaust Duct Hose, Thick(6-ply) for Tight Space(2 Clamps and 1 Tape)
- Puncture Resistant: Our dryer vent hose boasts 6 thickened layers for exceptional puncture resistance. It outperforms ordinary 3-layer hoses, ensuring lasting durability.
- High Heat Tolerance: With a maximum heat-resistant temperature of 248℉, this Duct hose can insulated handle the high temperatures generated by your dryer.
- Easy Installation: Included are a roll of aluminum foil tape and 2 clamps, making installation a breeze. Its self-extending and flexible duct design, along with wrap-around ends, simplifies setup.
- Enhanced Exhaust Capacity: Featuring a narrower steel wire spacing and wider diameter layout, this hose delivers robust exhaust capacity, reducing wobble and noise issues.
- Versatile Use: Perfect for dryer exhaust and other applications, including HVAC ducting, planting ventilation, and 3D laser printing rooms. Enjoy exceptional ventilation in various settings.
Commonly used in heavy industrial applications or demanding commercial environments. This type of duct is often used for handling high-temperature gases, strong chemical corrosion, or situations requiring very high fire resistance. For example, it is used for ventilating hot gases emitted during certain special manufacturing processes, chemical plants, or high-temperature processing equipment.
We’ve designed the assembly of our hose to be as simple as possible—setup requires no tools and takes only 2 minutes of your time. Our Dryer Vent Hose doesn’t require professional help, or electrical or plumbing installation (see for yourself how easy it is).
Dryer Vent Hose FAQs
Please contact us for detailed drawings, specifications or CAD Models (DWG, DXF, STEP, RHINO)
Customer Reviews
I just completed a big clean of my dryer (took the back off and the entire lint trap out) and also replaced the hose.I have no complaints about the hose. It did what is was supposed to with no flaws.The enclosed clamps were a joke. No matter how much or which way I turned them they didn't close. I reused my old clamps.The enclosed tape was shredded. Not sure how that happened, but I wasn't going to use it anyway so I didn't care.A note: take the time to disassemble your dryer to physically remove the built up lint. I always clean the lint filter after every use and use a vacuum hose attachment down the lint trap once a month. The pile of lint in the attached picture was packed into the very bottom of the lint trap. I only found it by removing the back of the dryer and then removing the entire lint trap.
This hose is nice. It is a little more aluminum foil-ish than other comparable dryer vent hoses. The key with these is to get the right size. You have to balance getting one that is long enough to allow you to move the dryer out when needed with one that is short enough to allow you to easily tuck the excess away behind your dryer. I went with a 4 foot hose and it was perfect. I could have probably got away with using a 3 foot one though. The hose is more flexible than it looks and I was able to maneuver it well enough to be able to push the dryer back to the wall. There is still a 4 to 6 inch gap from the wallThe hose fits most dryer exhaust and wall vent connections perfectly, Very snug. Those are pretty much standard sizes. The hose comes with two hex nut clamps to secure it to the connectors, using a screwdriver to tighten it down. However, I opted to re-use the thumb screw clamp that I had from my old hose because it is much easier to use and I could tighten them much quicker. Either way you go, it is pretty easy to install. It took me less than 5 minutes.The hose is well constructed and pretty solid, but really only time will tell.
I needed to use a longer hose, as the semi-rigid one i had was too short when i needed to pull the dryer out to make adjustments behind it.This kit came in clutch as the other hose wasn't even clamped to the wall or dryer, so the included clamps, and the aluminum tape came in very handy.The tape is EXTREMELY thin and I assume isn't intended to do anything except for seal any possible holes or punctures, but was helpful as the angle i turned the hose i had to adjust multiple times and i did create a hole.
Was having trouble with old dryer vent hanging onto wet lint and clothes were taking forever to dry. Only had this a few weeks but can already see a difference. Clothes dry faster and more evenly. Vent was easy to install and didn't seem as flimsy as the one before. Flexibility and fit were great and made it easy to slide dryer back in place.
Good fit easy to useWould buy again